BATTERY CHARGER USER’S MANUAL PART- 2: THEORY OF OPERATION
MCEnPC23-REV.2.4 Page 59
x. End of Discharge Alarm (2
nd
Low Volt Level)*
End of Discharge Alarm is activated if the battery voltage decreases below a preset value during a preset time. It can
be used as a critical alarm to prevent excessive battery discharge. We can enable or disable and adjust Low Voltage
Disconnect Alarm as shown on the procedure below:
Alarms?
Ok
Next
Pr
Exit
Adjust? Level1
Ok
Next
P
Exit
ON 115.5V EnDis
Set
Exit
Next
Pr
ON
OFF
Next
Exit
:getyou Next till Press
Next
Exit
-
ON EnDis
Discharge of End
10.5A 114.7V
:getyou Next till Press
ON 115.5V EnDis
Figure 59 : End of Discharge Alarm adjustments procedure.
* : Included, enabled upon customer request only. Can also be field activated
** : Optional
To Next Page
Loading...