Vaillant MultiMatic 700/2 - Page 88

multiMATIC 700/2
Notes
10/2015 84 Training 0020228700_00
Solar circuit 1
Collector temperature
Reset runtime
Solar yield sensor
Solar flow volume
Solar circuit prot.
Min. collector temp
Solar pump boost
Current flow rate
Purging time
Maximum temperature
Switch-on differential
Solar cylinder 1
Switch-off differential
Temperature difference 1
Switch-on differential
Switch-off differential
Solar pump status
Solar pump runtime
Level 3: Installer level
Ventilation
Air quality sensor 1
Air quality sensor 2
Max. air qual. sensor
Cylinder
Hot water
*2
Current cyl. temp.
*2
Anti-legionella day
*2
Anti-legionella time
*2
Cylinder boost offset
*1, *2
Circulation pump
*2
Domestic hot water
Parallel cyl. charging
Max. cyl. charg. time.
*1, *2
DHW req. anti-cy time
*1, *2
1
Ch. pump overrun time
*1, *2
Cylinder charging pump
*1, *2
Cyl. temp.: Bottom
Minimum temperature
TD1 sensor
Maximum temperature
TD2 sensor
TD output
Cyl. boost hysteresis
Target flow temp.
Buffer cylinder
DHW temp. sensor, top
Heat. temp. sens., bot.
DHW tmp. sensor, bot.
Heat. temp. sens., top
Max.DHW fl.targ.temp.
*2
Displayed if "Cylinder" =
"active" is selected
Buffer cylinder
*3
Cyl. temp.: Top
*3
Cyl. temp.: Bottom
*3
*3
Displayed with VR 70 = 1,
VR 71 and system diagram
= 1 and 8 – 13
= Displayed with VR 70 = 12
= Displayed for VR 70 = 6, 12
= Displayed in conjunction with recoVAIR .../4
*1
= Displayed with system diagram = 2, displayed with VR 70 = 3, 5, 6
= Displayed with VR 70 = 3
= Displayed in conjunction with aroTHERM, flexoTHERM