Maintenance Manual________________________________________________________________
112 _________________________________________________________________ M210886EN-G
Opening and Viewing History Files
By default, the history files are located in the CDU in the
D:\Avimet\HISTORY\month folder. The files can be viewed on the
workstations by sharing the drive and mapping it on the workstation. In
some systems, the CDU stores the history files on a network drive which
can be accessed by sharing the drive and mapping it on the workstation.
1204-050
Figure 28 ASCII Log View: Opening History Files
Typical names of different history files are listed in Table 56 on page 112.
To open and view history files, do the following:
1. Start the ASCII Log View application by clicking the ASCII Log
View button in the Windows taskbar or the Tools panel in the
Diagnostics application.
2. Click the Open button in the toolbar. A file selection window is
displayed.
3. In the file selection window, open the D:\Avimet\HISTORY folder, or
another folder specified for history files in your system.
Table 56 Sample ASCII Log View File Names
Example Path and File Name Stored Data Explanation
Avimet\history\(month\)
(PARAMETER)_02L_25.his
Weather data Parameter data for
measurement site 02L from
the 25th day of the month
Avimet\history\(month\)
REPORTS_25.his
Reports Report data on the 25th
day of the month
Avimet\history\(month\)
EVENTS_25.his
Events Event data on the 25th day
of the month
To Next Page
Loading...
