Chapter 5 _______________________________________________________________ Diagnostics
VAISALA_______________________________________________________________________ 75
Displaying Whole Image
To see the whole image, click the Fit view button. The image will be
zoomed out so that the whole image can be seen in the available panel size.
To keep this setting even when the panel size is changed, select the Keep
fit view option next to the Fit View button.
Moving the Image (Panning)
Typically, the whole image is not shown at once, especially when zoomed
in. To show the parts of the image that are not displayed, you can move the
image by doing the following:
- Click the mouse on the image (the hand symbol turns into a fist
symbol), keep the mouse button pressed down, and drag until you can
see the desired part of the map.
Viewing Device Details in Overview Panel
If configured in your system, the Overview panel provides a quick glance
to the overall status of your AviMet system, including device details.
To get more information on the devices displayed in the Overview panel,
do the following:
1. Select a device by clicking the device symbol on the image. When
selected, the device symbol will have a blue frame around it:
2. The details of the device will be displayed in the Device details panel
on the right, for example, the following:
- Description of the device, which contains useful information
about the device, entered at system configuration.
- Device status, for example, OK, Faulty, or Degraded, see Table
36 on page 67.
- The events related to the selected device.
For detailed information on the details, refer to section Device Details
Panel (In Overview Panel) on page 66.
To Next Page
Loading...
