Maintenance Manual________________________________________________________________
96 __________________________________________________________________ M210886EN-G
You can modify the terminal display settings by selecting the options in the
Settings frame of the Terminal panel. The settings define the way sensor
messages and commands are displayed in the Terminal panel. See Table
44 on page 96.
The Terminal panel can be closed and opene d by using the plus/minus
icon on the upper left corner of the panel.
Menu Bar
The main IO Terminal functions can be selected from the menu bar.
Table 44 IO Terminal: Terminal Display Settings
Option Description
Visible symbols
for binary
Shows the non-printable characters (binary values) as
symbols.
VT100 Emulates a VT100 terminal.
Local echo Displays the commands you type in the Terminal panel on
the screen. In this case, the commands may be shown on
the screen twice: once by your workstation and once by the
field device.
Auto LF Inserts a new line on the screen after each message that is
received from the field device. This makes it easier to read
the field device messages.
Auto Wrap Starts a new line on the screen after 80 characters.
Table 45 IO Terminal: File Menu
Command Description
Exit Exits IO Terminal and closes the connection.
Table 46 IO Terminal: Log Menu
Command Description
Log to file To start logging data to the temporary directory (as defined by
your TMP environment variable), select the Log to file option.
To disable logging, clear the selection. Logging ends
automatically when you close IO Terminal.
If logging use
timestamps
Select this to use timestamps in log files.
To Next Page
Loading...
