Vaisala AviMet - Figure 29 Sensor Selector User Interface; Table 58 Sensor Selector Columns

Maintenance Manual________________________________________________________________
118 _________________________________________________________________ M210886EN-G
1205-016
Figure 29 Sensor Selector User Interface
The following table describes the Sensor Selector elements.
Table 58 Sensor Selector Columns
Column Description
Name Name of the sensor in the system.
Mode Shows if the sensor is disabled or enabled. When the mouse
pointer is placed over a row, a list with the following options is
displayed:
Enabled: Data from an enabled sensor is used in the system
and its status is "Online".
Disabled: Data from a disabled sensor is not used in the
system and its status is "Offline".
State The current status of data (Manual/Automatic).
Type Type, Sensor or interface
Model Sensor model, for example, CT25K.
Location Location of the sensor, for example, runway 10L.
Status Status of the sensor:
Online: Sensor is working normally and its data is used in
the system.
Unavailable: Sensor is offline/unavailable and its data is
not used in the system.
Faulty: Sensor is enabled and used in the system but it is
not working properly. You should disable the sensor and use
alternative sources for data.
Degraded: Sensor data is degraded but used in the
system. You should investigate the situation, disable the
sensor and use alternative sources for data.