Maintenance Manual________________________________________________________________
62 __________________________________________________________________ M210886EN-G
Events Panel Tabs/Event Types
The system events are displayed on several tabs, the number and type of
which depends on the system configuration and the user profile.
The following describes the typical tabs.
The All tab may contain events of the type "NONE". This indicates events
that have not been classified under the main types, for example, some
customer-specific events.
Events Panel Statuses and Colors
The following table describes the statuses and the typical status colors used
in the Events panel.
Table 31 Events Panel Tabs /Event Types
Type Explanation
Operational/
OPER
Shows preconfigured operational messages, for example,
messages related to predefined changes in weather.
Technical/
TECH
Shows preconfigured technical messages, for example,
about a sensor problem, or a communication problem
between a sensor and the CDU.
All Shows all event messages configured in the system.
Table 32 Events Panel Statuses and Colors
Status Color Description
ALARM Red An unacknowledged event informing about a fault that
prevents the system from working properly, or a critical
operational change. Typically requires immediate action.
ACKNOWLEDGED
ALARM
Red status
column only
An acknowledged alarm event.
WARNING Orange/Yellow An unacknowledged event about a situation that, if
persisting, may lead into the system not working properly.
Typically requires at least monitoring.
ACKNOWLEDGED
WARNING
Orange/Yellow
status column
An acknowledged warning event.
INFO Blue Notification of a change in the system state or in the
operational situation. Typically does not require any action.
Any of the above Blue frame Selected event. A selected unacknowledged alarm or
warning will be acknowledged when clicking the
Acknowledge button.
To Next Page
Loading...
