Vaisala AviMet - Operating Sensor Selector; Disabling Data Use; Enabling Data Use

Chapter 8 ___________________________________________________________ Sensor Selector
VAISALA______________________________________________________________________ 119
Operating Sensor Selector
Disabling Data Use
If a sensor is faulty, or being maintained, you can disable the sensor by
doing the following:
1. Move the mouse pointer over the row for the sensor that you want to
disable. The list for selecting Disabled or Enabled is displayed:
2. Select Disabled. This will change its status to "Offline" and the data
from it will not be published for other system processes.
Enabling Data Use
To make the system use data from a sensor that has been disabled, do the
following:
1. Move the mouse pointer over the row for the sensor that you want to
enable. The list for selecting Disabled or Enabled is displayed:
2. Select Enabled. This will change its status to "Online" and the data
from it will be published for other system processes.