Vaisala AviMet - Lists of Processes; Figure 11 Diagnostics: List of Processes Example; Table 19 Server Status; Table 20 List of Processes Columns

Chapter 5 _______________________________________________________________ Diagnostics
VAISALA_______________________________________________________________________ 53
The Server Status column indicates the following:
Lists of Processes
Lists of the processes on the CDU can be displayed by clicking the
numbers in the All processes, Active processes, or Missing processes
columns. Missing processes are indicated with red color.
For more information on ROA objects and processes, see section System
Architecture on page 30.
1204-059
Figure 11 Diagnostics: List of Processes Example
The lists provide basic information on the processes, see the table below.
Table 19 Server Status
Status Description
Starting The CDU has just been started up and it is waiting until
startup delay ends.
Active CDU is online and running (Remote Object Server service
is running).
Hot standby The CDU is the passive CDU (in duplicated systems).
Manual active User has selected the CDU as the active CDU.
Manual standby User has selected the CDU as the passive CDU.
Missing The CDU is missing (Remote Object Server service is
missing or there are network problems).
Table 20 List of Processes Columns
Columns Description
Name Name of process.
Status Status of process. See Table 21 on page 54
Address IP address of the CDU where the process is running.