Chapter 5 _______________________________________________________________ Diagnostics
VAISALA_______________________________________________________________________ 57
Some functions in Object browser can be selected from the menu bar. The
typical menu commands are presented in the following table.
Detailed information on the objects can be viewed by double-clicking the
object in the Object browser. This will open the Object Details panel for
the object. See section Object Details Panel on page 58.
By right-clicking the object in the Object browser, you can select from
which server (Active, Server A, Server B) the object details are displayed
in the Object details panel:
1204-062
Figure 14 Diagnostics: Selecting Server for Object Details
Table 26 Object Browser File Menu Options
Command Description
Save as Saves the active object details as ASCII file.
Print Prints the active object detail panel.
Exit Exits Object browser.
Table 27 Object Browser View Menu Options
Command Description
Tabbed view Arranges the open object details panels as tabs.
Tile Arranges the open object details panels so that they do not
overlap each other.
Cascade Arranges the open object details panels so that they overlap
each other.
Next Shows the next tabbed details panel.
Previous Shows the previous tabbed details panel.
Close Closes the active details panel.
Close all Closes all open details panels.
To Next Page
Loading...
