Valco baby MCP-4 Series User Manual

4-8 Valco Cincinnati, Inc.
Section 4 - Programming
MC075 - MCP-4 Control Unit
First Use
Setup
(Wizard)
The first time the MCP-4 Control Unit is switched on, it will guide you
through a series of menus in order to setup your control for your unique
production needs. If these needs change later, the settings can be changed
in the setup.
The first time the MCP-4 Control Unit is switched on, the following screen
will appear:
Use the Plus/Minus Buttons to scroll though choices. If asked to enter aUse the Plus/Minus Buttons to scroll though choices. If asked to enter a
Use the Plus/Minus Buttons to scroll though choices. If asked to enter aUse the Plus/Minus Buttons to scroll though choices. If asked to enter a
Use the Plus/Minus Buttons to scroll though choices. If asked to enter a
numerical value, press the OK Button for the Thumbwheel Mode or usenumerical value, press the OK Button for the Thumbwheel Mode or use
numerical value, press the OK Button for the Thumbwheel Mode or usenumerical value, press the OK Button for the Thumbwheel Mode or use
numerical value, press the OK Button for the Thumbwheel Mode or use
the Plus/Minus Buttons for single digit editing. Press the Right Arrowthe Plus/Minus Buttons for single digit editing. Press the Right Arrow
the Plus/Minus Buttons for single digit editing. Press the Right Arrowthe Plus/Minus Buttons for single digit editing. Press the Right Arrow
the Plus/Minus Buttons for single digit editing. Press the Right Arrow
Button to move to the next setup choice. Button to move to the next setup choice.
Button to move to the next setup choice. Button to move to the next setup choice.
Button to move to the next setup choice. Continue this until all selections
are made. For example:
The following is an
example for the “other”
application. Scroll
through all choices to
see which fits your
needs the best.
Applications that have
the screen are listed
after the screen name.
Language
Application
Language Language
Language Language
Language - Language is a global setting. This means that all screens will
appear in the chosen language.
Application Application
Application Application
Application - Many applications are available. Each application type has
“built in, behind-the-scenes” default settings to assist you in programming
the unit for the application type. If your application type is not listed, simply
choose “other.” (Use the Plus/Minus Buttons as needed to scroll through the
choices.)
x7x7
x7x7
x7
(All Applications)
(All Applications)
(Press seven times)

Valco baby MCP-4 Series Specifications

General

Brand	Valco baby
Model	MCP-4 Series
Category	Control Unit
Language	English