4-16 Valco Cincinnati, Inc.
Section 4 - Programming
MC075 - MCP-4 Control Unit
Configure the
Valve/Channel
Settings
The settings are preprogrammed for the specific application selected. It is
best not to change any setting unless you are a trained technician and/or
have assistance from a member of the Valco Technical Assistance Team.
Caution!Caution!
Caution!Caution!
Caution! Changing settings may bring unwanted consequences
in the performance of your system. Valco Cincinnati,
Inc. recommends having a qualified technician setup
your system parameters. Otherwise, loss of production
time may result from improper settings.
All screens for configuring the
valves/channels are available in
all applications.
To Next Page
Loading...
Need help?
General
