5-16 Valco Cincinnati, Inc.
Section 5 - Operation
MC075 - MCP-4 Control Unit
Job Button
The Job Save/Recall Mode allows the MCP-4 Control Unit to save and recall
up to 100 different jobs for fast programming.
(All Applications)
Load - Load -
Load - Load -
Load - Load a previously saved job.
When “Load” is highlighted, press the OK Button to enter a job number. Use
the Plus/Minus Buttons to change the job number.
When the desired job number has been entered, press the Right Arrow
Button to highlight “OK” and press the OK Button. The job is loaded.
Enter the job number and information in
a chart (see Appendix A - Job Charts)
for quick job set up. Also, jobs can be
overwritten, so it is important to keep
track of them.
Load a Job
To Next Page
Loading...
Need help?
General
