5-3Valco Cincinnati, Inc.
Section 5 - Operation
MC075 - MCP-4 Control Unit
Gluing Mode - Continued
4.
Auto Glue - Auto Glue -
Auto Glue - Auto Glue -
Auto Glue - Applies a strip of adhesive based on the length of
the scanner signal. Input the start delay (length from the leading
edge of the product to the beginning of the glue line) and the
end delay (the end of the glue line to the trailing edge of the
product).
The
Auto GlueAuto Glue
Auto GlueAuto Glue
Auto Glue Glue Mode is available
in the following applications:
Corrugated, Folding Carton, Packaging,
and Others.
Scanner Lockout
Scanner Lockout Scanner Lockout
Scanner Lockout Scanner Lockout
Scanner Lockout - Enter a product length to act as a scanner lockout when
holes, writing, or other items produce a false trigger by the scanner.
(Available in Corrugated,
Folding Carton, Envelope,
Packaging, Timer, Core
Winding, and Others)
To Next Page
Loading...
Need help?
General
