Valco baby MCP-4 Series User Manual

5-10 Valco Cincinnati, Inc.
Section 5 - Operation
MC075 - MCP-4 Control Unit
Auto Glue ModeAuto Glue Mode
Auto Glue ModeAuto Glue Mode
Auto Glue Mode In Auto Glue Mode, one
Start Delay LengthStart Delay Length
Start Delay LengthStart Delay Length
Start Delay Length (the length from the leading
edge of the product to the beginning of the glue line) and one
End DelayEnd Delay
End DelayEnd Delay
End Delay
LengthLength
LengthLength
Length (the end of the glue line to the trailing edge of the product) are
entered. The glue is applied automatically based on the length of the
scanner signal.
Continuous Glue ModeContinuous Glue Mode
Continuous Glue ModeContinuous Glue Mode
Continuous Glue Mode
In Continuous Glue Mode, the glue will flow continuously as long as the
speed is greater than Vmin.
Machine
Speed
Indicates a menu screen to the Left
(Press the Left Arrow Button to see it.)
Password Security
Level
“Cont.” = Continuous Glue Mode
Valve Number
(1-4)
Start Delay Length
Machine
Speed
Indicates a menu screen to the Left
(Press the Left Arrow Button to see it.)
Password Security
Level
End Delay Length
“Auto” = Auto Glue Mode
Auto Glue Mode MenusAuto Glue Mode Menus
Auto Glue Mode MenusAuto Glue Mode Menus
Auto Glue Mode Menus
Auto Glue Mode MenusAuto Glue Mode Menus
Auto Glue Mode MenusAuto Glue Mode Menus
Auto Glue Mode Menus

Valco baby MCP-4 Series Specifications

General

Brand	Valco baby
Model	MCP-4 Series
Category	Control Unit
Language	English