VDO CANcockpit Series User Manual

The assignment of the new defined Symbols
works as described in the previous steps.
1.) Select the Device without Symbol or with
Symbol to be exchanged.
2.) Pick the new created Symbol from the
Symbol list.
3.) Close this step by selecting another Device
of choice.
Now Master, Satellites and Displays are
completed with the correct and required
Symbols.
June 2009
Training WinGauge Software
page 30

VDO CANcockpit Series Specifications

General

Brand	VDO
Model	CANcockpit Series
Category	Measuring Instruments
Language	English