Performing basic system configuration tasks 7-17
Chapter 7: Initial Configuration
Wave Server Installation Guide
4. If the Locale setting is correct for your system, go to step 5. If not, select your locale from
the drop-down list.
When you change the
Locale setting, you are reminded that you may need to update any
area codes that you have already defined in the First Digit Table to reflect new area code
requirements for the selected locale. (If you are installing Wave ISM for the first time, no
area codes have yet been defined.)
For more about editing the First Digit Table, see “Setting the Home Area Code” in
Chapter 7 in the Wave Global Administrator Guide
Click
OK to continue.
5. Click
Customize to review the default advanced locale settings.
To Next Page
Loading...
