VIDEOJET DataFlex 6530 - 5.2.2.1 iAssurance Screen

Videojet DataFlex 6530 Operator Manual - Rev AA 5-7
CLARiTY Operating System
5.2.2.1 iAssurance Screen
Videojet DataFlex 6530 iAssure technology can reduce the waste and rework by conducting
print quality spotchecks in real time and detect recurring print defects.
The printer has a built-in sensor which creates an image of the printed ribbon as the ribbon
moves forward. The printer compares the captured image to the intended image and evaluates
any area of mismatch to determine the pass/fail of the code. The printer triggers a fault when a
pre-set number of consecutive codes fail that will either stop the line or send the product into a
reject or inspection area (if the line is configured with one).
Using the iAssure screen
1. Touch the Performance area on the Home screen. The Performance screen opens as shown in
(Figure 5-4 on page 5-6). Scroll down to view the iAssure metric. Refer Table 5-4 on page 5-6
for more information on the iAssure metrics.
2. Navigate to Tools > Diagnostics >Printhead > iAssure > View Latest Image to view the last
printed image captured.
iAssurance
Production Stop
The number of times production has stopped.
Ignored Print
Signals
The number of ignored print signals.
Short Term
Speed
The average speed over 5 minutes of operation.
Short term
Efficiency
The efficiency of actual prints per minute over the nominated prints per
minute which is given as a input for a period of 5 minutes.
Long Term
Speed
The average speed over 10 minutes of operation.
Long term
Efficiency
The efficiency of actual prints per minute over the nominated prints per
minute which is given as a input for a period of 10 minutes.
Trend Speed The trend speed value.
Trend Efficiency The trend efficiency value.
Nominal Speed Enter the required packs per minute speed.
Option Description
Table 5-4: Performance Option (continued)