Videojet DataFlex 6530 Operator Manual - Rev AA 5-25
CLARiTY Operating System
5.3.1.2 Using the Consumables Screen
Touch on the Diagnostics screen to access the consumables parameters (Figure 5-22).
The Consumables Diagnostics screen displays the following parameters:
Option Description
Ribbon Supply Diameter The measured diameter of the supply ribbon. The measured
diameter of the supply ribbon can be compared to the actual
ribbon diameters after calibration to determine the accurate
functioning of the calibration system.
Ribbon Waste Diameter The measured diameter of the waste ribbon.The measured
diameter can be compared to the actual ribbon diameters after
calibration to determine the accurate functioning of the
calibration system.
Ribbon Tension The last ribbon tension reading.
Printing Mode The printing mode. The following options are available:
• Thermal Transfer (that uses a ribbon)
• Direct (that uses the printer without a ribbon and printing
directly on to thermal sensitive labels).
Table 5-17: Consumables Diagnostics Screen Description
Figure 5-21: Consumables Diagnostics Screen
To Next Page
Loading...
