LEARN MODE OTHER USEFUL INFORMATION
133
OTHER USEFUL INFORMATION
When MXProDV comes to the end of a Learned Script, it stops. You can re-initiate
the same or any other Learned Script by entering
SHIFT+LEARN+<LEARNED SCRIPT #> for
the script you want to run.
You can do the following in a Learned Script:
• Perform transitions, including use of Reverse and Speed settings.
• Choose CURRENT and NEXT sources.
• Use the Freeze function.
• Transition audio, video, or both.
You cannot do the following in a Learned Script:
• Create or transition to Compose screens.
• Use Chroma Key.
• Use the Demo.
• Use PIPs.
MXProDV memorizes a manual transition (such as when using the
T-BAR) as an auto-
matic transition at the currently set speed — that is, it is remembered as if you had
used the
PLAY button rather than the T-BAR.
MXProDV erases a Learned Script when:
• You turn off MXProDV.
• MXProDV loses power (such as a power failure).
• You overwrite an existing Learned Script.
ABORTING A PLAYBACK SESSION
Once MXProDV begins playing back a Learned Script, you can abort the playback
session by pressing
LEARN.
Once you end playback of a Learned Script, the
PLAY button and T-BAR act normally,
playing the effect indicated on the screen rather than the Learned Script.
To Next Page
Loading...
