ADVANCED OPERATIONS RESETTING MXPRODV FACTORY DEFAULTS
155
RESETTING MXPRODV FACTORY DEFAULTS
When you first power up MXProDV, it operates using settings defined by Videonics.
As you go about using MXProDV and changing its various settings, the unit stores
your settings in its memory (called NVRAM). You can reset all settings to their fac-
tory defaults.
To reset MXProDV to its factory defaults:
1 Power down the unit (using the Power switch).
2 Press down and hold the
SHIFT and SETUP buttons.
3 Turn on MXProDV’s Power switch.
4 After the unit powers up and you see the Preview screen, release all buttons.
To Next Page
Loading...
