INPUT EFFECTS COLOR N EG
81
COLOR NEG
Inverts all colors in the image.
Parameter Values — Zero or one.
0 = Off: 1 = On
CHROMAKEY
Chromakey replaces all occurrences
of a color in an image with a differ-
ent image. In this example, (1) the
block of color in the first image (the
area behind Kong’s head) gets
replaced with the image of the
Golden Gate Bridge (2). The result-
ing image (3) is Kong superimposed
over the bridge. See Chapter 10,
Chromakey, for complete details.
FLIP VERTICAL
Flips picture top-to-bottom.
Parameter Values — Zero or one.
0 = Off: 1 = On
STROBE
Slows down the picture’s video frame rate. Motion appears halting, or
jerky — like that produced by a strobe light. MXProDV automatically dis-
ables all strobe settings during transitions.
Parameter Values — Zero through nine. Zero turns off the effect.
Higher values increase the effect. Setting 1, for example, produces the
look of film: setting 2 makes video look like an old movie. Strobe is dis-
abled during transitions.
12
3
To Next Page
Loading...
