What does 'SID xx not responding, retry yy' mean on my Vigilant MX1?
The message 'SID xx not responding, retry yy' on your Vigilant Security System indicates that the remote panel SID xx is not responding. The yy value shows how many attempts have been made. This can be due to a network fault or the panel being offline. Ensure the remote panel is online and that there are no network faults.
What to do if my Vigilant Security System shows 'Remote panel did not respond'?
If your Vigilant Security System displays 'Remote panel did not respond', it means communication with the remote panel may have been lost, or it has been taken offline. Check for any communication faults and ensure that the remote panel is still online.
Details the LCD, Fire Brigade Panel, soft keys, indicators, and keypad.
Explains the four access levels (0-3) and their functionalities.
Describes how the MX1 indicates alarms and details alarm display.
Covers how the MX1 indicates faults and how to respond to them.
Instructions for recalling points and zones in off-normal states.
Procedures for resetting individual zones, points, or ranges.
Steps to disable or enable specific points or zones.
Guides for performing alarm, operate, auto-reset, and fault tests.
Procedure for accessing critical service functions via Level 3.
Provides information on loop voltage, current, and fault conditions.
Methods for installing and re-addressing replacement MX devices.
Lists LCD messages, their causes, and recommended actions.
General| Brand | Vigilant |
|---|---|
| Model | MX1 |
| Category | Security System |
| Language | English |
To Next Page
