40 D-302756
You can now press the button to take you to the "
VOICE
REPORT
" menu, or press the button to take you to "
<OK> TO
EXIT
".
C. To Configure Event Types to be Reported to User
8.
9.
10.
11.
1st PRIVATE TEL. NO.
Enter the first private telephone number (including area code, if required)
of the private subscriber to which the system will report the event groups
defined in Report To Private.
12.
13.
14.
15.
2nd PRIVATE TEL. NO.
Enter the second private telephone number (including area code, if
required) of the private subscriber to which the system will report the event
groups defined in Report To Private.
16.
17.
18.
19.
3rd PRIVATE TEL. NO.
Enter the third private telephone number (including area code, if required)
of the private subscriber to which the system will report the event groups
defined in Report To Private.
20.
21.
22.
23.
4th PRIVATE TEL. NO.
Enter the fourth private telephone number (including area code, if required)
of the private subscriber to which the system will report the event groups
defined in Report To Private.
24.
25.
Here you determine the number of times the communicator will dial the
called party’s number (private telephone).
26.
4th private tel#
4th private tel#
3rd private tel#
2nd private tel#
2nd private tel#
1st private tel#
Redial attempts
3rd private tel#
1st private tel#
VOICE REPORT
To Next Page
Loading...
