Visonic POWERMASTER-10 - INSTALLER GUIDE User Manual

60 D-302756
Enter the number of the first zone that you designate for activating this
output.
33.
34.
or
Select between "disable", "turn ON", "turn OFF", "pulse active"
and "toggle".
35.
36.
37.
Enter the number of the second zone that you designate for activating
this output.
38.
39.
or
Select between "disable", "turn ON", "turn OFF", "pulse active"
and "toggle".
40.
41.
42.
Enter the number of the third zone that you designate for activating this
output.
43.
44.
or
Select between "disable", "turn ON", "turn OFF", "pulse active"
and "toggle".
45.
46.
47.
48.
49.
or
Select between "by line fail NO" and "by line failYES".
50.
Pressing the or buttons at any stage in the procedure
will take you to “ <OK> TO EXIT ”.
PGM: BY LINE FAIL
by line fail NO

PGM: BY LINE FAIL
PGM: BY ZONES
c - zone
c - zone
disable

c – zone Z:00
b - zone
b - zone
a - zone
disable

b – zone Z:00
disable

a – zone Z:00

Visonic POWERMASTER-10 - INSTALLER GUIDE Specifications

General

Category	Security System
Model	POWERMASTER-10
Wireless Protocol	PowerG
Backup Battery	Yes
User Codes	Up to 48 user codes
Type	Wireless Alarm System
Partitions	3
Communication	GSM
Wireless Frequency	868 MHz
Keypads	Up to 8 keypads
Event Log	1000 events
Power Supply	External power supply
Backup Battery Voltage	7.2V
Operating Temperature	-10°C to +50°C
Humidity	85% non-condensing
Zones	Up to 30 wireless zones