WAGNER VU 1 - Table of Contents; Electrical Connection Plans for Vu

3
VERSION 03/2020 ORDER NUMBER DOC2330732
VU 1/VU 2/VU 3
Table of Contents
1 ABOUT THESE INSTRUCTIONS 6
1.1 Preface 6
1.2 Warnings, Notices and Symbols in these Instructions 6
1.3 Languages 7
1.4 Abbreviations 7
1.5 Terminology for the Purpose of this Manual 8
2 CORRECT USE 9
2.1 Device Type 9
2.2 Type of Use 9
2.3 For Use in Potentially Explosive Areas 9
2.4 Processible Working Materials 9
2.5 Misuse 9
3 IDENTIFICATION 10
3.1 Explosion Protection Identication 10
3.2 Permissible Device Combinations 10
4 BASIC SAFETY INSTRUCTIONS 11
4.1 Safety Instructions for the Operator 11
4.1.1 Electrical Devices and Equipment 11
4.1.2 A Safe Work Environment 12
4.1.3 Personnel Qualications 12
4.2 Safety Instructions for the Personnel 13
4.2.1 Personal Safety Equipment 13
4.2.2 Safe Handling of WAGNER Powder Spray Devices 13
4.2.3 Grounding the Device 14
4.2.4 Product Hoses 14
4.2.5 Electrical Connection Cables 15
4.2.6 Cleaning and Flushing 15
4.2.7 Maintenance and Repair 16
4.2.8 Protective and Monitoring Equipment 16
5 DESCRIPTION 17
5.1 Design of the VU 1 Reciprocator 17
5.2 Design of the VU 2 Reciprocator 18
5.3 Design of the VU 3 Reciprocator 19
5.4 Mode of Operation 20
5.5 Variants 20
5.6 Scope of Delivery 20
5.7 Data 21
5.7.1 Technical Data 21
5.7.2 VU 1 Dimensions 22
5.7.3 VU 2 Dimensions 23
5.7.4 VU 3 Dimensions 24
5.8 Accessories 24
6 ASSEMBLY AND COMMISSIONING 25
6.1 Training of Assembly/Commissioning Personnel 25
6.2 Storage Conditions 25
6.3 Installation Conditions 25