WAGNER VU 1 - Grounding the Powder Coating System; Safety Checks

45
VERSION 03/2020 ORDER NUMBER DOC2330732
VU 1/VU 2/VU 3
6.13.1 GROUNDING THE POWDER COATING SYSTEM
1
2
4
3
5
6
P_01614
1 Only use mains cables with grounding strand!
2 Connect grounding cable with booth and signal ground!
3 Remove all paint from hooks and other hanger parts!
4 Do not wear insulating gloves!
5 Wear electrostatically conductive footwear!
6 The oor must be electrostatically conductive!
6.14 SAFETY CHECKS
A skilled person must check to ensure that the device is in a reliable state after it is
assembled and commissioned.
This includes:
– Carry out safety checks in accordance with Chapter 8.2.3.