4-1
4 Configuring the NanoLockSpray
source
The Waters NanoLockSpray™ dual, electrospray, ion source enables the
optimized co-introduction of sample and lock-mass reference compound
directly into the ion source. At low flow rates, this feature provides
authenticated, exact-mass measurement in both MS and MS/MS modes.
Contents
Topic Page
Overview of the NanoLockSpray source 4-2
Selecting and Configuring the NanoLockSpray source 4-4
Deploying the sprayer platform adjuster assembly 4-5
Adjusting the sprayer tip position 4-6
Setting up the camera 4-7
Optional glass capillary sprayer 4-8
To Next Page
Loading...
