Weidemann Basic line 4080T - Page 139

Operation
Operating the front hydraulic connections 7.9
139
[en] | 05/2019 | 1000408123 | 4080T Basic Line | Operator’s Manual
7.9.4.1
Operating additional hydraulic connections with the scroll wheel
B A
0
I
I
0
2
1
Fig.126: Releasing the pressure on
additional hydraulic connections
Releasing the pressure on additional hydraulic connections
To couple the additional hydraulic connections, they must first be depres-
surized.
1. Switch off the engine of the vehicle.
2. Move starting key to position I.
3. Move switch 1 to position I.
4. Move the scroll wheel on the joystick repeatedly in either direction.
ð The hydraulic connections on the loader unit are depressurized.
Coupling and uncoupling additional hydraulic connections
Coupling and uncoupling additional hydraulic connections see Coupling
and uncoupling the hydraulic connections on page 133.
7