Operation
7.12 Working with attachments
158
Operator’s Manual | 4080T Basic Line | 1000408123 | 05/2019 | [en]
Designated use
The pallet fork attachment is used for raising, transporting and setting
down loads. Any other use of the pallet forks is not in accordance with its
designated use. The pallet forks consist of the fork carriage and forks.
The forks must always be used in pairs as delivered. The operator must
receive special training for using the pallet forks.
Setting the gap between the fork tines
WARNING
Tipping hazard due to incorrect adjustment of fork arms!
A tipping vehicle can cause serious injury or death.
► Adjust the spacing of the fork arms so that they are symmetrical to
the center line of the vehicle.
► Adjust the spacing of the fork arms so that they are as far apart as
possible.
CAUTION
Danger of crushing when shifting the fork arms!
Fingers and hands can be crushed between the fork carriage and fork
arms.
► Do not touch the sliding surface of the fork carriage when shifting the
fork arms.
► Wear protective gloves.
Fig.156: Fork arms distance
The forks of the pallet fork are adjustable.
To Next Page
Loading...
