WinGD X72DF - Thrust Bearing - Do a Check of the Axial Clearance with a Inside Micrometer

6.4.3 Thrust bearing - do a check of the axial clearance with a inside
micrometer
Periodicity
Description
Working hours 7000
Duration for performing preliminary requirements 0.0 man-hours
Duration for performing the procedure 0.5 man-hours
Duration for performing the requirements after job completion 0.0 man-hours
Personnel
Description Specialization QTY
Engine crew Basic AR
Support equipment
Description Part No. CSN QTY
Micrometer 94101 1
Supplies
Description QTY
None
Spare Parts
Description Part No. CSN QTY
None
SAFETY PRECAUTIONS
• None
PRELIMINARY OPERATIONS
• The engine must be stopped and made safe for maintenance, refer to section 4.1 Do
maintenance work - general procedure
X72DF
AA00-1203-00AAA-360B-A
Maintenance Manual Thrust bearing - do a check of the axial clearance with a inside
micrometer
Winterthur Gas & Diesel Ltd.
- 136 - Issue 002 2020-10