WinGD X72DF - 14 Group 9 - Monitoring Instruments

14 Group 9 - Monitoring instruments
14.1 Crank angle sensor unit
14.1.1 Crank angle sensor unit (supply unit) - remove the proximity sensor........778
14.1.2 Crank angle sensor unit (supply unit) - install the proximity sensor......... 782
14.1.3 Crank angle sensor unit (flywheel) - remove the proximity sensor..........786
14.1.4 Crank angle sensor unit (flywheel) - install the proximity sensor............790
14.2 Selective catalytic reduction system (SCR)
14.2.1 SCR - remove the valve..............................................794
14.2.2 SCR - install the valve................................................796
14.3 Electronic components
14.3.1 Gas detector - calibrate.............................................. 798
14.3.2 LDU-20 - remove....................................................804
14.3.3 LDU-20 - install..................................................... 808
14.3.4 CCM-20 - remove................................................... 812
14.3.5 CCM-20 - install.....................................................814
14.3.6 MCM-11 - remove................................................... 816
14.3.7 MCM-11 - install.....................................................818
14.3.8 IOM-10 - remove....................................................820
14.3.9 IOM-10 - install......................................................822
X72DF
Maintenance Manual
Winterthur Gas & Diesel Ltd.
- 777 - Issue 002 2020-10