6.5 Engine stays
6.5.1 Engine stays (friction shims) - do a check of the pre-tension
Periodicity
Description
Working hours 7000
Duration for performing preliminary requirements 0.0 man-hours
Duration for performing the procedure 8.0 man-hours
Duration for performing the requirements after job completion 0.0 man-hours
Personnel
Description Specialization QTY
Engine crew Intermediate 2
Support equipment
Description Part No. CSN QTY
None
Supplies
Description QTY
None
Spare Parts
Description Part No. CSN QTY
None
SAFETY PRECAUTIONS
WARNING
Injury Hazard: Hydraulic tools can cause injury to personnel. Always put on gloves, a
face shield and safety goggles when you do work with hydraulic tools.
PRELIMINARY OPERATIONS
• The engine must be stopped and made safe for maintenance, refer to section 4.1 Do
maintenance work - general procedure
X72DF
AA00-1715-00AAA-360A-A
Maintenance Manual Engine stays (friction shims) - do a check of the pre-tension
Winterthur Gas & Diesel Ltd.
- 152 - Issue 002 2020-10
To Next Page
Loading...
Need help?
General
