Operate the turning gear to move the crank counterclockwise to the position shown in
view A.
16 Attach the lever chain hoist (003) to the lug (007) and tighten lightly the chain.
17 Attach the tool connecting rod (004) to the tool (005).
18 Attach the chain block (007) to the lifting tool (004) and tighten lightly the chain (view B).
19 Remove the connecting rod tool (006).
20 Remove the lever chain hoist (003).
21 Operate the chain blocks (002, 007) to move the connecting rod (001) away from the
crank and through the column door.
22 Remove the chain block (007).
X72DF
AA00-3303-00AAA-520A-A
Maintenance Manual Connecting rod - remove
Winterthur Gas & Diesel Ltd.
- 386 - Issue 002 2020-10
To Next Page
Loading...
