19 Apply Molykote past G-n to the threads of the six bolts.
20 Use the engine room crane to put the lifting tool 94341 in position of the piston crown.
21 Attach the three brackets to the lifting tool with the six bolts. Make sure that the brackets
fully engage in the holes in the piston crown.
22 Torque the four screws to the related value, refer to section 16.1 Tightening instructions.
X72DF
AA00-3403-00AAA-523A-A
Maintenance Manual Piston - prepare before removal
Winterthur Gas & Diesel Ltd.
- 478 - Issue 002 2020-10
To Next Page
Loading...
