Winkhaus blueMatic EAV4 - Page 87

510736487
3
EN
blueMatic EAV4 / EAV4+ Installation, Operating and
Maintenance Instructions
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.com ∙ Subject to technical changes
Description Part-no.
Set tappet contact
T-SET STÖßEL OSTULP  SB UX SW
including frame part

Face plate for sash part tappet contact is profile-dependent
T-STÖßEL STULP FLÜGEL F R MC 
T-STÖßEL STULP FLÜGEL F R MC 
T-STÖßEL STULP FLÜGEL F MC 
T-STÖßEL STULP FLÜGEL F SW 
T-STÖßEL STULP FLÜGEL UX MC 
T-STÖßEL STULP FLÜGEL UX MC 
T-KABEL STÖßEL-MOTOR FL M
to connect the tappet contact to the motor housing

alternatively T-KABEL STÖßEL-MOTOR FL M
to connect the tappet contact to the motor housing

T-MOTORKASTEN EAV (V) BL 
T-MOTORKASTEN EAV (V) BL
(with app control)

for retrofitting mechanical locking systems AVD standard
T-VERLÄNG KABEL M STKKÜ M BUCHSE
for connection to external power supply „DIN rail“

to
ekey dLine set TB Winkhaus EAVEAVEAVBM
ekey dLine set TG Winkhaus EAVEAVEAVBM
ekey


ekey dLine fingerprint including cover
ekey dLine controller including mounting plate
ekey dLine cable FP
ekey dLine cable MT  m Winkhaus EAV
EAVEAVBM
Notice: The necessary spacers (plastic profile) for the tappet
contact frame part and other accessories are included in the
blueMatic EAV tappet contact installation, operating and
maintenance instructions.