WORKSWELL WIRIS PRO - Advanced

13. MAIN MENU (SETTINGS)
Modes ABOVE, BELOW and BETWEEN work analogously, but only mark the image area appropriate for the re‐
specve mode; ABOVE mode marks only areas with temperature above the upper threshold, BELOW marks only
areas with temperatures below the threshold and BETWEEN marks the area with temperature beneath the upper
but above the lower threshold.
Note: The colors of marked areas can be set in Advanced menu. Default colors are red for Above mode,
blue for Below mode, green for Between mode and red and blue color for Above & Below mode.
Note: The currently set isotherm limit is shown in the temperature legend.
Note: Whenever user acvates any of the Alarm modes, the palee is set to simple Grayscale to make
the visualizaon clearer. This can be overriden by seng the desired palee manually again, from the
Palee menu. Addionally, this behavior can be completely disabled in the Advanced menu.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version: 201215 EN, 15
th
Dec, 2020
All pictures are only for illustraon.
Real values may vary.
43