WORKSWELL WIRIS PRO - Radiometric JPEG; Radiometric TIFF

14. IMAGES AND VIDEO
14 Images and Video
WORKSWELL WIRIS Pro allows the user to capture and record several image and video formats. The user is
advised to save only the desired formats, since each image or video format have performance and memory
requirements that add up.
Each image is tagged with Exif metadata including source, date, me and GPS coordinates (if available).
Following formats are supported:
Images
• Radiometric JPEG
• Radiometric TIFF
• Screenshot JPEG
• IR Super‐Resoluon JPEG
• Visible JPEG
video
• Radiometric
• Visible
Images can be saved directly to connected memory (Flash Drive or SD Card). Video can be recorded only to the
internal SSD memory due to high memory speed requirements.
14.1 Images
All the images can be opened in standard image viewers. Images named as radiometric contain addional tem‐
perature informaon and can be further edited in CorePlayer or Thermolab soware.
14.1.1 Radiometric JPEG
Plain JPEG image from thermal camera without any overlays, containing addional temperature informaons.
14.1.2 Radiometric TIFF
TIFF image in 16bit gray‐scale, where each pixel represents measured temperature. It can be opened in standard
image viewer, but the contrast is not adjusted.
TIFF image is meant as opened format for user developed applicaons. It can be also used with third party
soware Pix4D.
The temperature value in degrees Celsius can be calculated with the following formula:
T
pixel
=
pixel
40
− 100
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version: 201215 EN, 15
th
Dec, 2020
All pictures are only for illustraon.
Real values may vary.
56