Need help?Do you have a question about the WORKSWELL WIRIS PRO and is the answer not in the manual?
Legal information regarding product warranty, usage, and liability.
Important warnings for product usage, installation, and operation.
Guidelines on device usage, storage, and environmental conditions.
Steps to resolve technical problems by searching the manual or contacting support.
Explains formatting conventions used in the manual (e.g., UPPER CASE, Courier).
Information on contacting support or visiting the product website for assistance.
Details on how Workswell s.r.o. releases product updates and where to find them.
Explanation of firmware as the device's internal control program and update usage.
Step-by-step guide to connect the system components for operation.
Information on connecting the WIRIS Pro to a display via HDMI micro video output.
Details on connecting an RC receiver via S.BUS for system control during flight.
Explanation of controlling the WIRIS Pro system using a standard USB keyboard.
How to access the WIRIS Pro's internal SSD memory using an USB On-The-Go connection.
Information about using and installing a MicroSD card for optional storage.
Details on the DC connector and voltage requirements for powering the WIRIS Pro.
Simple instructions on how to safely power down the WIRIS Pro system.
Guide on how to adjust the focus of the infrared camera using a focus tool.
Information on mounting the WIRIS Pro system to a drone using UNC threads.
Overview of the device's input ports and shared connector for S.BUS, CAN, GPS, and Trigger.
Details on using the S.BUS input port for RC controller communication.
How to connect S.BUS signal via Amimon Connex for RC transceiver control.
Connecting S.BUS signal via DJI Lightbridge 1 for RC transceiver control.
Using a basic digital input for manual capture triggering via a trigger signal.
Using the GPS interface for NMEA protocol and UART communication.
Using MAVLink protocol for communication with UAV autopilots like Pixhawk.
Connecting the WIRIS Pro to DJI CAN Bus for DJI M600 drone integration.
Controlling WIRIS Pro functions using a remote controller and assigned buttons.
Explains different screen layouts for arranging elements on the screen.
Details the default INSPECTION layout for inspection and measurement.
Describes the SECURITY layout for maximizing camera screen size for security purposes.
Explains the FULLSCREEN layout for displaying a single camera stream over the entire screen.
Details the Picture in Picture Fusion layout for simultaneous display of both cameras.
Overview of the MAIN MENU for system customization and configuration.
Settings for automatic, manual, and span temperature range modes.
Settings for zoom, primary camera selection, layout, and thermal opacity.
Options for manual image capture, video recording, NUC, and periodic capture settings.
Selection of nineteen color palettes to apply to the infrared image.
Options for displaying measurement crosses, temperatures, and alarm visualization.
Access to advanced device settings, categorized into nine sub-menus.
Settings for thermal camera parameters like emissivity, temperature, and NUC.
Settings for visible camera parameters like gamma, white balance, and exposure.
Toggling information datapoints in the inspection panel and GPS information.
Options for selecting image/video file types and storage media.
Specifying the appearance of ALARMS display, including palette, colors, and opacity.
Setting the behavior of S.BUS port and Trigger port, including S.Bus Offset.
Formatting storage devices, moving files, searching for updates, and copying logs.
Setting system time, date, units, language, network, and reboot options.
Displays system information like firmware version, serial number, and temperatures.
Information on opening and editing captured images, including radiometric data.
Details on plain JPEG images from the thermal camera with temperature info.
Information on TIFF images for radiometric data, suitable for applications.
Saving the current display state, including overlays, as a JPEG image.
Capturing images for higher spatial resolution reconstruction using advanced algorithms.
Plain JPEG images from the visible camera in full HD resolution.
Details on recording and handling thermal and visible video streams.
Recording temperature data from the thermal camera for editing.
MP4 based video format for easy display, without exact radiometric values.
Compressed video stream from the visible camera in HD resolution.
Managing storage media (SSD, SD Card, Flash Drive) via the menu options.
Instructions on formatting USB flash drives and SD Cards, and warnings about SSD formatting.
Connecting WIRIS Pro to PC/Mac via Micro USB cable to act as Mass Storage.
Step-by-step guide to download, copy, and install firmware updates for the device.
Overview of Workswell CorePlayer software for editing radiometric images and videos.
Specifies the recommended operating and storage conditions for the WIRIS Pro system.
Explains the internal warm-up process of the infrared camera sensor.
Details the NUC process for maintaining measurement accuracy and its impact.
Information on external calibration and accuracy specifications for the WIRIS Pro camera.
Instructions for cleaning the WIRIS head and cables using water and soft cloth.
Guidelines for cleaning the infrared lens with specialized liquids and cotton wool.
Basic steps to check power supply if the device does not turn on.
Explains the functions of the reset button for Safe Mode and factory reset.
Describes the Safemode application and its options for resolving device issues.
How to reset the WIRIS Pro to factory default state using the pin button.
Note regarding connecting the TRIGGER mode input to avoid PWM output conflicts.
Reminder to ensure the WIRIS Pro version is up to date and where to find info.
General| Thermal Sensitivity (NETD) | < 50 mK |
|---|---|
| Frame Rate | 30 Hz |
| Focus | Fixed |
| Video Output | HDMI |
| Digital Zoom | 4x |
| Storage | microSD card |
| Interfaces | USB, HDMI |
| Spectral Range | 8 µm to 14 µm |
| Storage Temperature | -20°C to +60°C |
| Pixel Size | 12 µm |
| Temperature Range | -20 °C to 150 °C |
To Next Page
