WORKSWELL WIRIS PRO - Layout

13. MAIN MENU (SETTINGS)
bright areas of the image.
WIDE DYNAMIC RANGE MODE ‐ toggles ON and OFF. Wide dynamic range cleverly maps the observed
brightness levels through the image to bring more contrast out of areas that’re in shadow or uneven light,
providing a clearer, more informave image in high contrast scenes.
DEFOG ‐ toggles ON and OFF. Defog aempts to bring out more detail in foggy or misty scenes.
NOISE REDUCTION 2D ‐ sets one of 5 available levels of spaal noise reducon or turns it o. Spaal
noise reducon looks at each frame individually and aempts to decrease noise by comparing values of
neighboring pixels. Higher 2D noise reducon sengs might lead to loss of detail in the image.
NOISE REDUCTION 3D ‐ sets one of 5 available levels of temporal noise reducon or turns it o. Tempo‐
ral noise reducon looks at series of frames and aempts to decrease noise by comparing current pixel
value with the past ones. Higher 3D noise reducon sengs might introduce aerimage or ”ghosng”
phenomena in the image.
COLOR GAIN ‐ sets the level of color gain from 60% to 200%. Color gain can decrease or increase the level
of color saturaon of the image.
EXPOSURE MODE ‐ cycles between the modes AUTO, SHUTTER PRIORITY, IRIS PRIORITY, MANUAL. AUTO
mode controls all of the parameters of SHUTTER, IRIS and GAIN automacally and aempts to provide
the best possible image on basis of heuriscs. SHUTTER PRIORITY and IRIS PRIORITY modes allow user to
set one of these parameters manually and allow the other two to be determined automacally. MANUAL
mode allows the user to set all three parameters manually.
SHUTTER ‐ sets the shuer duraon between 1 second and 1/10000th of a second. High shuer duraons
increase the amount of available light, helping to decrease the amount of noise, at the cost of blurring
objects captured in moon. Set the shuer duraon to 1/100 or 1/120 to eliminate icker from arcial
lighng in countries with 50Hz and 60Hz power grid frequencies respecvely.
IRIS ‐ sets the iris (aperture) value between F2.4 and F22. Allows the user to set the physical iris size
manually. The iris seng changes the camera’s depth of eld; small aperture (High F/ value) means higher
depth of eld ‐ broader envelope within which observed scenery remains relavely sharp. Level of the
iris seng also inuences the total amount of light available in the camera, which can be detrimental to
amount of noise in the image.
GAIN ‐ sets the gain correcon value between 0dB and 34dB. High values of gain can increase brightness
of image at the cost of amplifying digital noise.
EXPOSURE COMPENSATION ‐ sets the brightness adjustment within any of the automac or semi automac
exposure modes with level from ‐6 to +6 or turns it o. Exposure compensaon allows the user to choose
the desired brightness level which the automac or semiautomac EXPOSURE MODE sengs will adjust
the image to.
DEFAULT ‐ opon to reset all the items above to their default values.
These sengs items operate similarly to any other common visual spectrum camera and the intricate nuances
of their inner funconing is beyond the scope of this manual. Users who do not have the insight into the proper
funconing of these parameters will be in most cases best served by leaving them to their default values.
E‐mail and Web
info@workswell.eu
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version: 201215 EN, 15
th
Dec, 2020
All pictures are only for illustraon.
Real values may vary.
47