Xerox 4112 System Administration Guide

Setups
Xerox 4112/4127 Copier/Printer 9-11
System Administration Guide
Auto Print
Set the time from the end of print job until the execution of next print job. Set the value from 1
to 240 seconds, in one second steps. If you select Off printing can start immediately, once the
machine is ready.
1. From the Machine Clock/Timers screen, select Auto Print, and select Change Settings.
2. Select Off or On.
3. If you selected On, set the time by using the
S, T, or the numeric keypad to enter a
numeric quantity.
4. Select Save to save the settings and return to the previous window.
Printer Lockout Duration
Set the time from the start to the end of printer lockout. Set the values from 0 to 23 hours and
to 59 minutes. If you select Off no printer lockout occurs.
1. From the Machine Clock/Timers screen, select Printer Lockout Duration, and select
Change Settings.
2. Select Off or On.
3. If you selected On, set the time by using the
S, T, or the numeric keypad to enter a
numeric quantity.
4. Select Save to save the settings and return to the previous window.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English