Xerox 4112 - Exiting the Power Saver Mode; Interface Cables; Using the Ethernet Interface

Product Overview
Xerox 4112/4127 Copier/Printer 1-15
System Administration Guide
Exiting the Power Saver Mode
The following describes how to exit the Power Saver mode. The Power Saver mode is exited in
the following instances:
• By pressing the Power Saver button
•Receiving Print Data
1. Press the Power Saver button.
Interface cables
When connecting to a network, use the Ethernet interface.
Using the Ethernet Interface
The Ethernet interface supports the following 2 types:
•100Base-TX
•10Base-T
This section describes the installation procedure for the Ethernet interface.
1. Confirm that the power switch is turned off.
2. Connect a network cable to the Ethernet interface connector.
Note
Prepare a network cable suitable for your network connection. When changing the network
cable, consult the appropriate personnel.
3. Switch on the machine.
Power Saver
button
Downloaded From ManualsPrinter.com Manuals