Accounting and Authentication/Security Settings
Xerox 4112/4127 Copier/Printer 8-25
System Administration Guide
Login to Remote Accounts
This is the operation of the machine through a network using CentreWare Internet Services.
Login to Remote Accounts uses a remote authentication server to manage authentication. No
user information is registered on the machine.
The functions restricted by Remote Access are as follows:
• Printing is limited to print jobs sent from a computer.
• To use the Account Administration feature, use the print driver to set account information
such as user ID and passcode.
• If authentication using account information fails for a print job, the print data will be either
saved in the machine or deleted depending on the Charge Print settings.
Note
Printing is not limited when the Login Type is set to Remote Access in System Administrator
mode.
• If the Authentication feature is enabled, authentication is required to access the
CentreWare Internet Services home page even if you are not using the Authentication
feature for any service.
Create/View User Accounts and Reset User accounts are made unavailable once you enable
Login to Remote Accounts.
If you choose this option and select Save, accounting will be automatically disabled. However,
job log will be kept instead.
Note
A registered user ID on the remote authentication server can be a maximum of 32 characters,
and the password a maximum of 128 characters. For SMB authentication, however, the
password can be a maximum of 32 characters.
You will prompted to confirm your selection. Be sure to review the changes that will occur once
Login to Remote Accounts is enabled. Select Yes to enable Login to Remote Accounts.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
