Setups
9-130 System Administration Guide
Xerox 4112/4127 Copier/Printer
Certificate Revocation Retrieval Settings
Use the following procedure to access and change the Certificate Revocation Retrieval Settings:
1. From the Security Settings screen, select Certificate Revocation Retrieval Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the desired setting or enter the desired value.
4. Press Save.
5. Press Close to return to the Security Settings screen.
Other Settings
Other Settings allows you to choose from a variety of options within the Connectivity Network
Setup structure.
E-mail Receive Protocol
The E-mail Receive Protocol setting allows you to select between the following options;
• SMTP: Simple Mail Transfer Protocol (or SMTP) is a networking protocol used for sending e-
mail messages between servers. Most e-mail systems that send e-mail over the Internet use
SMTP to send messages from one server to another; the messages then can be received
with an e-mail client using either POP or IMAP.
• POP3: Post Office Protocol (or POP) is used to receive e-mail from a mail server. POP3 is a
newer version of the protocol, and can be used with or without SMTP.
Add Domain Name to User Name
The Add Domain Name to User Name feature allows you to add your user name onto the
domain name associated. For example, if your domain name was: na.xerox.net and your user
name is: joe then the following example would be: joe.na.xerox.net
Choose from the following options;
• Off: Selecting this option disables this feature.
• On: Selecting this feature enables this feature and allows you to add your Domain name to
the User name.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
