Xerox 4112 System Administration Guide

Using CentreWare Internet Services
Xerox 4112/4127 Copier/Printer 3-5
System Administration Guide
EtherTalk
This section describes the settings for EtherTalk.
1. Connect to CentreWare (See Chapter 3 Connect to CentreWare Internet Services from a
computer on page 3-2).
2. Click the Properties tab.
3. Click + on the left of Connectivity and + on the left of Protocols to display the items in the
folder.
4. Click the EtherTalk.
5. Set the Printer Name.
6. Set Zone Name.
7. Reflect the values as the machine’s setting values.
a. Click the Apply New Settings. A screen to enter the user name and password will be
displayed.
b. Enter the System Administrator UserID and password into User Name and Password,
and then click OK.
Note
The default User ID value is 11111 and password is x-admin.
c. The right frame on the web browser will change to the machine reboot display.
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English