Setups
9-142 System Administration Guide
Xerox 4112/4127 Copier/Printer
Scan-to PC Defaults
You can select the default protocol that is used for file transfer from FTP, SMB, and SMB (UNC
format).
1. From the Scan Services Settings screen, select Scan to PC Defaults.
2. Select the item to be set or changed.
3. Select Change Settings.
4. Select the default settings for the selected item.
5. Select Save; you are returned to the Scan-to PC Defaults screen.
6. Select Close to return to the Scan Service Settings screen.
Transfer Protocol
Select the default value for the transfer protocol. Select either FTP, SMB, or SMB (VNC Format)
Login Credential to Access Destination
Select the default value for the login credentials. Select either None or Remotely Authorized
User.
User Name for FTP Scan
Select the default value for the User Name for FTP Scan.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
