Xerox 4112 System Administration Guide

Setups
9-94 System Administration Guide
Xerox 4112/4127 Copier/Printer
These buttons appear on the Edge Erase screen, which can be found by accessing the Copy
feature, Layout Adjustment tab.The following screen is displayed:
Copy Defaults
From this screen, you can select the default settings for the various copy features. Selections
made here are displayed on the Copy screen.
When the power is switched on, when the machine exits the power-saving mode, or when the
Clear All button is pressed, these default settings are displayed. By assigning default values to
commonly used features, you reduce the number of selections when choosing features for the
copy process.
Use the following procedure for selecting the various Copy Defaults.
1. From the Copy Service Settings screen, select Copy Defaults.
2. Select the item to be set or changed, and select Change Settings.
Note
Select
S to display the previous screen and select T to display the next screen.
Note
Each of the items shown in the above illustration is discussed on the following pages.
Edge Erase
preset
buttons
Downloaded From ManualsPrinter.com Manuals

Xerox 4112 Specifications

General

Brand	Xerox
Model	4112
Category	All in One Printer
Language	English