Setups
Xerox 4112/4127 Copier/Printer 9-95
System Administration Guide
3. Select the item to be changed such as Paper Supply (as shown below).
4. Select the desired setting for that item.
5. Press Save; you are returned to the Copy Defaults screen.
6. Repeat Steps 1-5 until you have selected the desired setting for each Copy Defaults item.
7. Select Close to return to the Copy Service Settings screen.
Paper Supply
Select the default setting for the Paper Supply feature on the Basic Copying screen.
Tip
If the default value for the Reduce/Enlarge feature (refer to is on page 9-96) is set to Auto%,
then you cannot select the Auto option as the default setting for Paper Supply.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
