Xerox 4112 - Replacing the Booklet-Maker Staple Cartridge

Setups
Xerox 4112/4127 Copier/Printer 9-129
System Administration Guide
IPSec Settings
Use the following procedure to access and change the IPSec Settings:
1. From the Security Settings screen, select IPSec Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the desired setting or enter the desired value.
4. Press Save.
5. Press Close to return to the Security Settings screen.
IEEE 802.1x Settings
Use the following procedure to access and change the IEEE 802.1x Settings:
1. From the Security Settings screen, select IEEE 802.1x Settings.
2. Select the item to be set or changed, and select Change Settings.
3. Select the desired setting or enter the desired value.
4. Press Save.
5. Press Close to return to the Security Settings screen.
Downloaded From ManualsPrinter.com Manuals