Setups
9-42 System Administration Guide
Xerox 4112/4127 Copier/Printer
Alignment Adjustment Settings procedure
Save the adjustment results for squareness, print position, and scale as an alignment
adjustment type, and then assign the type to the desired paper tray.
1. Load paper in a tray.
2. Press the Log In/Out button, and enter the system administrator mode.
3. Select the Tools tab followed by the System Settings tab.
4. Select the Common Service Settings followed by the Maintenance Settings.
Log In/Out
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
Need help?
General
